All products

The complete TGR range: 32 fastener and plate references for metal construction, timber construction and insulated roofing. Every model is listed below with a link to its full technical sheet.

Most self-drilling models are supplied in carbon steel 1022A, stainless steel 410 or bi-metal A2/A4+SCM435. To specify by material or corrosion class rather than by application, see the bi-metal, stainless steel and corrosion resistant pages.

Metal construction — structure fixing

Self-drilling screws for fixing steel sheet and plate to steel structure.

Valley Fixing Fastener Hex big washer head. Roof valley and wall curtain fixing. Valley Fixing Fastener – EPDM Washer Bonded EPDM washer for a weathertight seal. Heavy Duty Function – Hex Washer Head Steel structure fixing up to 12.5mm plate. Heavy Duty Function – Phillips Pan Head #5 point drills max 12mm steel plate. Structure Fixing Fine Thread – Hex Fine thread. Faster drilling, stronger fastening. Structure Fixing Fine Thread – Phillips Countersunk flat head. Structure and OSB fixing.

Metal construction — light steel keel

Thin sheet, wall and board fixing to light steel framing.

Wall/Structure Fixing Screws Bigger hex head generates greater torque. Single Thread Thin Sheet Screw Sharp point, fast drill speed on thin sheet metal. Double Thread Thin Sheet Screws Bi-metal SS304. Drills up to 2mm steel. Expansion Wings Self-drilling Screws Cement fibreboard, wood and OSB to steel.

Timber construction — decking screws

Torx drive decking screws in carbon and stainless steel.

Carbon Steel Torx Decking – E-Coat Finish Ruspert, E-coat or zinc plated. 3.0-5.5mm. Carbon Steel Torx Decking – REXIUBAO Finish Ruspert, zinc or REXIUBAO. Up to 300mm long. Stainless Steel Torx Decking – Passivated Bright SS304/316. Tapping thread with scratshank. Stainless Steel Torx Decking – More Torque SS304/316. More torque for harder timber. Stainless Steel Torx Decking – Smaller Heads SS304/316. Smaller heads are easier to conceal. Stainless Steel Torx Decking – Zinc Plated SS304/316. Ruspert, E-coat or zinc plated.

Timber construction — wood and sheet screws

Phillips wood screws and Hi-Lo thread sheet metal screws.

Carbon Steel Phillips Wood Screw – Sharp Point Sharp point. Board to board fastening, 25-200mm. Carbon Steel Phillips Wood Screw – Faster Drilling Type 17 point prevents timber from splitting. Hi-Lo Thread Sheet Metal Screw Hi-Lo thread reduces distortion in thin sheet.

Insulation roofing fasteners

#12, #14 and #15 fasteners with CR-10 corrosion resistant coating.

#12 Standard Roofing Fasteners – Phillips 4.3mm shank. Insulation to steel and timber. #12 Standard Roofing Fasteners – Torx T30 torx pan head. 4.3mm shank. #14 Heavy Duty – Truss Head 4.8mm shank. Lengths up to 406mm. #14 Heavy Duty – Flat Head 4.8mm shank. Phillips flat head. #14 Heavy Duty – Torx 4.9mm shank. T30 torx pan head. #15 Extra Heavy Duty – Truss Head 5.25mm shank. Steel, OSB and aluminium decks. #15 Extra Heavy Duty – Flat Head 5.25mm shank. Phillips flat head.

Seam plates

AZ-55 Galvalume steel plates certified to FM4470.

2″ Metal Seam Plate 50.8mm. Fully bonded seams, single-ply membranes. 3″ Metal Seam Plate 76mm. Fully bonded seams, single-ply membranes. 2-3/8″ Metal Seam Plate 60mm. For all-purpose and heavy-duty fasteners. 2-3/8″ Barbed – Heavy Gauge 60mm, 1.0mm thick. Reinforced and bituminous membranes. 2-3/8″ Barbed – Standard Gauge 60mm, 0.8mm thick. Reinforced and bituminous membranes. 3″ Barbed Metal Seam Plate 76mm. For all-purpose and concrete drive fasteners.

For sizes or specifications not listed, please contact us for further information.